Excelvan Professional Filament 3D Printing Materials Spool of 3D Filament ABS 1Kg/2.2lbs With Tolerances: +/-0.02mm NO Air Bubbles for RepRap MarkerBot MakerGear Ultimaker etc (3.00mm, Skin)

Description:

ABS is made out of oil-based resources and it has a much higher melting point than PLA plastic. It’s also stronger and harder. It is an economical plastic notable for its low degree of shrinkage and warping.

Diameter Tolerances
Cheap filament usually extruded at lighter tolerances and with materials of questionable origin. For 1.75mm and 3mm filament, the outer diameter should not exceed +/- 0.1mm, for example,+/-0.05mm is OK. Anything over these tolerances could jam the extruder of the nozzle’s inner chamber, which is machined to exacting tolerances. Additionally, the use of out of tolerance filament will cause over or under extrusion, which is the major cause of blobbing and voids in the finished print. This is because the slicing software used to prepare the style for printing calculates exactly how fast to extrude based on a constant filament size. Our filament quality is very good with tolerances: +/-0.02mm.

Air Bubbles
Moisture laden ABS will tend to bubble and spurt from the tip of the nozzle when printing; reducing the visual quality of the part, part accuracy, strength and introducing the risk of a stripping or clogging in the nozzle. Our ABS filaments DO NOT have air bubbles.

Package includes:
1. 1x 3D printer filament
2. 1x leather box

Note:
1: PLA/ABS dual color filaments net weight: 1KG/2.2lbs, gross weight: 3.08lbs.
2: Flexible and PVA filaments are only used for short-range feeding 3D printer.
3: PVA filament should be kept in sealed, and PVA filament is only used as a support material. So, PVA must be used in double nozzles.
4: Print speed should be controlled in the range of 20-40mm/s while using wood、flexible or PVA filaments in ceae of print failure.

Product Features

  • Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc
  • Avaliable in both 1.75mm and 3.00mm diameter. Filament Diameter Tolerances: +/-0.02mm
  • Air Bubbles: Zero!
  • All the filaments should be placed in dry and ventilated environment to keep. And PVA filament should be kept in sealed
  • 19 Colors for choosing

Check Out Our Website For Details…

Anycubic 1.75mm Dark Blue PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.02mm

Specification:
Color: Dark Blue
Filament Weight: 1KG/2.2lb
Material: PLA
Filament diameter: 1.75mm
Temperature range: 200-230 Celsius
Spool Hole Diameter: 60mm
Roll Overall Diameter: 200mm
Roll Width: 55mm
Compatibile Printers:
RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and ect.

FAQ
Will the filament tangle?
Run the Load script from the onboard menus. Observe the plastic as it emerges from the nozzle.

Does it drop straight down, or curl up toward the extruder?
If it curls back up toward the extruder, the nozzle may be partially clogged.

Is the nozzle clogged?
Please use Kapton tape or 3M blue tape.

Having trouble getting the first layer to stick well?
Please adjust the nozzle calibration height.

What is the diameter specification?
It is 1.68mm~1.78mm, normally 1.7~1.73mm.

Package List
1 * 2.2lb 3D Printing Filament

Product Features

  • Color: Dark Blue
  • Eco-friendly Printing Material: PLA; 100% Biodegradable; Better smell
  • Dimensional Accuracy: +/- 0.02mm; makes your designs much Smoother and well-made
  • Printing Material Diamater: 1.75mm
  • Heating Temperature: 200-230 Degree Celsius

Detailed Information available on our Homepage…

Excelvan Professional Filament 3D Printing Materials Spool of 3D Filament ABS 1Kg/2.2lbs With Tolerances: +/-0.02mm NO Air Bubbles for RepRap MarkerBot MakerGear Ultimaker etc (3.00mm, Coffee)

Description:

ABS is made out of oil-based resources and it has a much higher melting point than PLA plastic. It’s also stronger and harder. It is an economical plastic notable for its low degree of shrinkage and warping.

Diameter Tolerances
Cheap filament usually extruded at lighter tolerances and with materials of questionable origin. For 1.75mm and 3mm filament, the outer diameter should not exceed +/- 0.1mm, for example,+/-0.05mm is OK. Anything over these tolerances could jam the extruder of the nozzle’s inner chamber, which is machined to exacting tolerances. Additionally, the use of out of tolerance filament will cause over or under extrusion, which is the major cause of blobbing and voids in the finished print. This is because the slicing software used to prepare the style for printing calculates exactly how fast to extrude based on a constant filament size. Our filament quality is very good with tolerances: +/-0.02mm.

Air Bubbles
Moisture laden ABS will tend to bubble and spurt from the tip of the nozzle when printing; reducing the visual quality of the part, part accuracy, strength and introducing the risk of a stripping or clogging in the nozzle. Our ABS filaments DO NOT have air bubbles.

Package includes:
1. 1x 3D printer filament
2. 1x leather box

Note:
1: PLA/ABS dual color filaments net weight: 1KG/2.2lbs, gross weight: 3.08lbs.
2: Flexible and PVA filaments are only used for short-range feeding 3D printer.
3: PVA filament should be kept in sealed, and PVA filament is only used as a support material. So, PVA must be used in double nozzles.
4: Print speed should be controlled in the range of 20-40mm/s while using wood、flexible or PVA filaments in ceae of print failure.

Product Features

  • Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc
  • Avaliable in both 1.75mm and 3.00mm diameter. Filament Diameter Tolerances: +/-0.02mm
  • Air Bubbles: Zero!
  • All the filaments should be placed in dry and ventilated environment to keep. And PVA filament should be kept in sealed
  • 19 Colors for choosing

Check Out Our Website For Details…

Excelvan Professional PLA 3.0MM Double Color 3D Filament Printing Materials Spool of 3D Printer Filament 1kg/2.2lbs With Tolerances: +/-0.02mm for RepRap MarkerBot MakerGear Ultimaker etc. (Blue+White)

Description
This is the best filament on the market. The 1.75mm filament holds a diameter tolerance of 0.02mm/0.0008″ which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel. We tested many filaments at both 100-micron and 200-micron layer resolutions on FDM printers and found this one is the best.

PLA is a common type of biodegradable filament often derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. PLA is available in hard or soft grade and can be extruded at a low nozzle temperature. PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity. PLA has a obvious feature that it’s translucent.

Package includes:
1. 1x 3D printer filament
2. 1x leather box

Note:
1: PLA/ABS dual color filaments net weight: 1KG/2.2lbs, gross weight: 3.08lbs.
2: Flexible and PVA filaments are only used for short-range feeding 3D printer.
3: PVA filament should be kept in sealed, and PVA filament is only used as a support material. So, PVA must be used in double nozzles.
4: Print speed should be controlled in the range of 20-40mm/s while using wood、flexible or PVA filaments in ceae of print failure.

Product Features

  • Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc
  • Avaliable in both 1.75mm and 3.00mm diameter. Filament Diameter Tolerances: +/-0.02mm
  • Air Bubbles: Zero
  • All the filaments should be placed in dry and ventilated environment to keep. And PVA filament should be kept in sealed
  • Professional spool, you can see the rest of the 3D Filament clearly .

Check Out Our Website For Details…