PLA Filament 1.75mm White, GEEETECH New 3D Printing Filament PLA for 3D Printer and 3D Pen, 1kg 1 Spool

Specification:
Material: PLA(Polylactic Acid)
Weight: 1KG (approximately 2.2 lbs)
Filament Diameter: 1.75mm (Dimensional Accuracy +/- 0.03mm)
Recommend print temperature :190-220℃
Recommend print speed:50-100mm/s
Bubble: no-bubble
1 Spool filament length:330m
Package Include:1*PLA 3d printer filament

Attention:
1.For avoiding nozzle clogging, Remove the filament from the extruder when you are not going to use the printer for a while.
2. Store it in a cool and dry place. Keep away from UV light.
3.We recommend pass the end of the filament in the holes provided on the spool to prevent getting tangled.

Product Features

  • Environmental-friendly, Made from starch raw materials derived from renewable plant resources
  • Vacuum Sealed Package:GEEETECH 3d filament is carefully vacuum packaged with desiccant to maintain low level of moisture content. And keep it dry and keep out dust and foreign particles, prevent nozzle jams.
  • High Precision +/- 0.03mm Tolerance: Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance, approximately 330m of filament on each spool ease of use, minimal warping, no odor,no clogging, no bubbles.
  • Tangle Free & No Plugging: It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free GEEETECH 3D printer filament comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances
  • Warranty Policy: GEEETECH provides money-back guarantee If you’re not satisfied with the quality, contact us in time.

Check Out Our Website For Details…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “PLA Filament 1.75mm White, GEEETECH New 3D Printing Filament PLA for 3D Printer and 3D Pen, 1kg 1 Spool”

  1. Great PLA. Great Prints Thank you. Weight upon delivery: 1.1kg total (spool and filament)My tests were carried out on an Original Prusa i3 MK2, slicing using S3D.During Print Impressions:First print was a 3DBenchy. Settings used were 207C Nozzle 60C Bed. The first layer adhered well to the PEI bed, no glue’s needed (your mileage may vary depending on the print surface). At 60mm/s speed there were no major problems with adhesion.A larger ‘Vase’ was also printed with no support for the large…

  2. As normal (I am always after more filament) I was looking for a very white PLA filament. By this I mean not translucent like most of the other brands on Amazon.I do have a brand I normally use but this is expensive by comparison and not available on Amazon.This new Geeetech filament appeared recently, so I decided to give it a go. I am also familiar with their other filaments from previous use.Anyway, in short this filament does not…

  3. Weight upon delivery: 1.1kg total (spool and filament)My tests were carried out on an Original Prusa i3 MK2, slicing using S3D.During Print Impressions:First print was a 3DBenchy. Settings used were 207C Nozzle 60C Bed. The first layer adhered well to the PEI bed, no glue’s needed (your mileage may vary depending on the print surface). At 60mm/s speed there were no major problems with adhesion.A larger ‘Vase’ was also printed with no support for the large…

Leave a Reply