PLA Filament 1.75mm Black, GEEETECH New 3D Printing Filament PLA for 3D Printer and 3D Pen, 1kg 1 Spool

Specification:
Material: PLA(Polylactic Acid)
Weight: 1KG (approximately 2.2 lbs)
Filament Diameter: 1.75mm (Dimensional Accuracy +/- 0.03mm)
Recommend print temperature :190-220℃
Recommend print speed:50-100mm/s
Bubble: no-bubble
1 Spool filament length:330m
Package Include:1*PLA 3d printer filament

Attention:
1.For avoiding nozzle clogging, Remove the filament from the extruder when you are not going to use the printer for a while.
2. Store it in a cool and dry place. Keep away from UV light.
3.We recommend pass the end of the filament in the holes provided on the spool to prevent getting tangled.

Product Features

  • Environmental-friendly, Made from starch raw materials derived from renewable plant resources
  • Vacuum Sealed Package:GEEETECH 3d filament is carefully vacuum packaged with desiccant to maintain low level of moisture content. And keep it dry and keep out dust and foreign particles, prevent nozzle jams.
  • High Precision +/- 0.03mm Tolerance: Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance, approximately 330m of filament on each spool ease of use, minimal warping, no odor,no clogging, no bubbles.
  • Tangle Free & No Plugging: It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free GEEETECH 3D printer filament comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances
  • Warranty Policy: GEEETECH provides money-back guarantee If you’re not satisfied with the quality, contact us in time.

Check Out Our Website For Details…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

One thought on “PLA Filament 1.75mm Black, GEEETECH New 3D Printing Filament PLA for 3D Printer and 3D Pen, 1kg 1 Spool”

  1. So it arrived nice and promptly, well packaged with a sealed bag containing silica. The roll actually weighs 1.176 kg which means you get 1kg filament plus the spool weight which is great.In printing, it works flawlessly on my setup (Anet A8) printing on glass at 195 and 60 degrees Celsius. No clogs, not retraction settings needed tuning, consistent extrusion and the winding is tangle free.Would recommend to anyone, I’m normally sceptical of names I’m not familiar with but to be…

Leave a Reply