NinjaFlex 1.75 mm 3D Printing Filament – Gold

Open a world of possibilities, limited only by your imagination. NinjaFlexTM, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.

NinjaFlex’s unique flexibility and smooth feeding characteristics enable you to create in ways you never thought possible.

Best Suited For:
  • Fused Deposition 3D printers that use 1.75mm or 3mm filament.
  • 3D printers that accept other types of filaments such as ABS and PLA
  • Have a question on NinjaFlex? Read our Frequently Asked Questions below

Features:
  • Filament shore hardness of approximately 85A
  • Consistent diameter and material properties provide reliable, high quality prints
  • Patent pending technology allows for smooth feeding
  • Low tack, low CoF exterior allows smooth feed through filament guides
  • High elasticity and excellent abrasion resistance
  • Excellent build platform adhesion and bonding between layers
  • REACH and RoHS 2002/95/EC Directive Compliant
  • 1.75mm filament spool = .50 kg
  • 3.00mm filament spool = .75 kg

Processing Guidelines:
  • Recommended extruder temperature: 210 – 225°C
  • Recommended platform temperature: 30 – 40°C

Product Features

  • Creates extremely flexible and strong prints
  • Specially formulated thermoplastic elastomer (TPE), ideal for 3D printers with direct-drive extruders
  • Low tack, low CoF exterior allows smooth feed through filament guides
  • High elasticity and excellent abrasion resistance
  • Excellent build platform adhesion and bonding between layers

Check Out Our Website For Details…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

One thought on “NinjaFlex 1.75 mm 3D Printing Filament – Gold”

  1. Now just the name says it all, NinjaFlex. I was amazed by the quality off this filament, I know it is a bit expensive compared to similar filaments (TPE) but let me tell you, this is next level, I know that I have to print at a slow rate around 35mms/40mms compare to others that I can print at a rate up to 70mms, but the print is excellent. Do you want to be a “Ninja” then this is the stuff.Please remember to check if your print is compatible with this stuff before you…

Leave a Reply