GEEETECH PLA Filament 1.75mm 1Kg spool for 3D Printer,Vacuum Packaging,Gray

Welcome to Geeetech, an international company, which has been commented itself to develop 3D printing industry for many years. Our main products are 3D printer and 3D printing accessories.

The filament is universally designed and compatible with most 3D printer applying to 1.75mm filament, with dimensional accuracy of +/- 0.05mm.

PLA or Polyactic Acid, is environment friendly, no small household printing, Lack of wrapping. As a result, it is very popular with 3D printing industry.

It is easy to use, can be printed either with heatbed or not.

Note:
After open the package, no exposure to fire or direct sunlight; stored in ventilated and dry place.

Product Features

  • 1. 1kg spool 1.75mm filament PLA in vacuum packing
  • 2. No impurities, no clogging
  • 3. Recommended temperature: 180-210 ℃
  • 4. Diameter tolerance +/- 0.02mm
  • 5. Environmental-friendly, Made from starch raw materials derived from renewable plant resources

Check Out Our Website For Details…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “GEEETECH PLA Filament 1.75mm 1Kg spool for 3D Printer,Vacuum Packaging,Gray”

  1. Quality filament 3D printer filament is a bit of a minefield with wide price variations and some truely awful filament around, especially at lower prices. Geeetech filament is a low-mid priced filament, but is well worth the money. The wood filament is slightly different to normal as it contains very fine wood particles. This means that during printing you get a very nice woody smell which fills the room. There is also some subtle colour differences as it prints as different wood particles ‘burn’ a different…

  2. Brilliant white with good consistency! Having used up almost all my remaining white PLA making my spool older and having an urgent Pokemon print to do for a friends birthday I stayed away from that auction site to get guaranteed next day delivery and found this Geeetech white.Amazon shipped this box in a white bubble bag which is not sufficient protection, you can see in my images where part of the spool has bust through the edge of its box and one side has snapped off. Had to get this print done so there wasn’t time to…

  3. Prints nicely. Brittle MDF finish. Smells good. Recommended This wood filament printed without problems using a 0.4mm brass nozzle on a V5 hotend.EDIT: Do not overheat the extruder past normal PLA temperatures! The wood particles will burn, further over heating the hotend, clogging your nozzles, and damaging the end of your bowden tube. My printer automatically heats the extruder to 240 if you wish to extrude filament and I learnt the above the hard way. :-(Temperature of 200c produced some stringing, so careful calibration of…

Leave a Reply