3D Printer Accessories Tweezers Print Repair Knife Set of 10 Tool Set Repair Knife Tweezers Shape Deburring Clamp Trimmer Cleaning

Product features:

For clean removal of ABS and PLA raft and supports.

6 forms to work on different corners and curves.

Works with all 3D printer ABS and PLA plastic models.

Durable blades of hardened steel.

Comfortable handles.

List:

A set of 10 in 1 toolkits

(Repair knife * 6, tweezers * 2, spade * 1, a pair of clipper * 1)

Product Features

  • Exquisite and comfortable handle design, feels very good. Lightweight spring design makes it easy to open and bite, and it can prevent fatigue when used.
  • Robust and sharp, plastic handle, long-term grip is no fatigue! The knife is made of high quality steel and sharply grinded surface.
  • Feel comfortable. Exquisite craftsmanship, comfortable grip, wide applicability and wide range
  • High quality material, environmentally friendly, non-toxic, high hardness, toughness, easy to use, high temperature resistance
  • Manual design of the mechanics of the human body, long-term grip and no fatigue

Detailed Information available on our Homepage…

Mavis Laven Extruder Brass Drive Gear, Brass Feed Extruder Wheel Drive Gear for MK7 MK8 Extruder 3D Printer Accessories, 26/40 Teeth(26teeth)

Specifications:

Color: Gold

Material: Brass

Teeth: 26 Teeth/ 40 Teeth (Optional)

Outer Diameter: Approx. 11mm/ 0.43in

Inner Diameter: Approx. 5mm/ 0.2in

Size: Approx. 11 x 11 x 11mm/ 0.43 x 0.43 x 0.43in

Package List:

10 x MK8 Extruder Gear (Only gear, other items on the pictures is NOT included.)

Note: Please allow 0-2mm error due to manual measurement. Thanks to your understanding.

Product Features

  • This is a durable drive parts used for MK7/ MK8 extruder, suitable for most 3D Printers.
  • High bearing capacity, ensure your printer working smoothly.
  • Made of high quality brass, no rust, and no corrosion, durable to use.
  • Light and portable, easy to install.
  • 10pcs a pack, high strength and high precision.

Detailed Information available on our Homepage…

4pcs TL-Smoother Plus Addon Module with 4pcs Heatsink 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Terminator Reprap MK8 I3

Description:
The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.

Parameter:
Heatsink Size: 26mm * 20mm * 6mm / 1.02inch * 0.78inch * 0.24inch
Heatsink material: Aluminum
TL smoother Size: 48mm * 25.3mm * 7.6mm(1.89inch * 1inch * 0.29inch)
Weight: 0.02kg(0.04lb.)

Features:
1. 8 big Package(SMC)diodes provides better heat dissipation performance that can handle bigger motor than small diodes.
2. Lower vibration lower noise smoother result.
3. All the boards adopt a patch diode with a strong consistency, the signal is more stable and the service life is longer.
4. How to use: Connect this TL-Smoother Module to the motherboard’s corresponding drive socket and motor.

TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs

Package Including
4 * 3D Printer TL-Smoother
4 * HeatSink
4 * Du-Pont Lines

Product Features

  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • Product Description: On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.
  • Heatsink size: 26 * 20 * 6mm, material: Aluminum. TL smoother size: 48mm * 25.3mm * 7.6mm.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.

Detailed Information available on our Homepage…

Rubber timing belt,3D Printer Accessories 2GT Timing Belt 10mm Rubber Synchronous Belt (White 10m) 10mm Timing Belt 3D Printer Belt White Open Synchronous Belt with Steel Core 10M

Features:

Made of high quality rubber material, it is very flexible, durable, practical and wear resistant. This product can be used in 10mm wide timing timing belts for 3D printers. Low elongation, low noise, high wear resistance and good crack resistance. High-quality craftsmanship and high quality are excellent accessories for 3D printers. Multi-purpose, also used in conveyors, mining equipment, automobiles, food machinery, dishwashers, etc.

Specifications:

Condition: 100% Brand New
Material: rubber
Color: White
Width: approx. 10mm / 0.4in
Length: approx. 10m / 32.8ft

Package list:

1 * Timing Belt

Product Features

  • Made of high quality rubber material, it is very flexible, durable, practical and wear resistant
  • This product can be used in 10mm wide timing timing belts for 3D printers
  • Low elongation, low noise, high wear resistance and good crack resistance
  • High-quality craftsmanship and high quality are excellent accessories for 3D printers
  • Multi-purpose, also used in conveyors, mining equipment, automobiles, food machinery, dishwashers, etc

Detailed Information available on our Homepage…