BIBO 3D Printer Metal Frame Dual Extruder Laser Engraving WIFI Touch Screen Cut Printing Time In Half Filament Detect Demountable Glass Bed

BIBO2 touch laser is the most featured printer. Now order the BIBO2 touch laser, we will send you the WIFI module (£14, pre-installed) and laser engraving module (£16) as the gifts. It is, of course, a 3D printer. But it’s also a laser engraver, too, permitting the ability to engrave on wood or even cut paper and cardboard. Not every 3D printer has such an extra feature, and those that do often cost far more than this machine.

1=3? Yes, 1 × BIBO2 touch laser =1 × laser engraving machine+2 × 3D printers(copy printing can print two same objects at the same time)

Machine Parameter
Extruder Number: 2
Frame: 6mm thick aluminum composite panel
Full-color Touch Screen: Yes
Laser Engraving: Yes
WIFI Control: Yes
Copy Printing: Yes
Continue Printing After Power Cut: Yes
Filament Run-out Detection: Yes
Removable Heated Bed: Yes (already leveled, usually no need to level it again)
Number of Fan to Cool Plastic extruded: 2

Printing Mode:USB connect PC or SD card or U disk
Machine Size:18.4*14*14.7(in)
Weight: 35.3 pounds

Printing Parameter
Build Size :8.4*7.3*6.3(in) / 214*186*160(mm)
Printing Layer Resolution: 0.05-0.3mm
Max. Nozzle Temp.:270℃
Recommended Software: Repetier-Host, Cura, Simplify3D
Compatibility: Windows, Mac, Linux
Filament Type:ABS, PLA, Dissolvable filament (PVA, HIPS)
Filament Diameter 1.75mm

SHOPPING NOW! You can get these gifts:
1 x laser engraving module
1 x WIFI module (pre-installed)
1 x acrylic cover kit (assembly required)
2.2 LBS (1.0KG)PLA filament
1 x SD card
1 x glass bed
1 x glue stick
allen wrenches
1 x USB cable

Product Features

  • “Huge” Color Touch Screen: with no threshold,which is more friendly and easier operation
  • Laser Engraving: extremely good at engraving objects such as wood, plastic, leather, paper and even cutting thin materials like plastic
  • Filament detection: if the filament spool runs out during printing, the machine automatically pauses for you to load in a fresh spool, very useful for big volume object printing
  • WIFI Control: the included networking feature permits you to control the print via a phone or PC
  • Copy printing: dual extruders can print two same objects at one time, cut your printing time at least in HALF

Click Here For More Information

bitbot3d © Structure Chassis Frame p3steel Laser Cut 3 mm. Galvanised Steel. Mount 3d Printer Prusa i3 p3steel Evolution of

The structure for the p3steel is one of the best chassis for 3d printer. With this chassis you can build a Prusa p3steel. Le Evolution of the Prusa i3 developed by irobri. In 3 mm galvanised steel and cut by laser supplied unpainted. The structure of the p3steel provides, rigidity and stability. It provides maximum quality 3d prints. For building a Prusa Reprap P3 steel, enhanced and the logical evolution of the Prusa i3 developed in Zaragoza. This laser cut in 3 mm steel galbanizado if paint. This estrutura is the latest version of the Model 3.5 with license (Edit). Compatible with LCD Bracket, switching power supply and holder for filament. Framework of great strength that does not allow deformation of Z axis. We have the complete tonillería printed, game pieces and rods. The shaft and this improved with the accommodation for 4 LM8UU Linear Bearings. The chassis is designed to accommodate and screwing the motherboards power supply and controllers. Small improvements to facilitate the mounting. Improvements of the evolution chassis structure p3steel against the Prusa i3. Robust design and construction of the frame p3steel. The chassis of the p3steel no left margin to movement or vibration. There is no oscillations of the frame in any direction (default design of the Prusa i3). Less number of pieces printed. Engine mounts are in steel. Better grip and sturdiness. Shorter rods and threaded rod in the Z axis. (more economic). The strength and robustness is the stamp of frame p3steel.

Click Here For More Information

3D Headwear, Skull Face Mask, Magic Scarf, Neck Gaiter, Bandana, Balaclava, Headband for Cycling , Motorcycling, Running, Skateboarding, Moisture Wicking UV Protection, Great for Men & Women

Have you ever bought head wear with 3D patterns on it?

Have you ever worn head wear with ultraviolet protection ? Ya, you may wear head wear with ultraviolet protection but 3D effects.

So ? have a try of multi-use head wear with 3D effects ,to feel more real stuffs with you! You will feel pretty cool by wearing our head wear when going out for running, riding, cycling, motorcycling, skiing, snowboarding,

Pretty cool 3D effects

Traditional head wear patterns looked strength-less and hypo-dynamic, which is bad for wearing stuff! All our magic head wear patterns are printed out by 3D printer instead of traditional machine modeled printing.

You can see the difference if wear it up to your face by comparing the traditional old head wear.All the patterns are full of energy , vitality, and power. Wearing this makes you feel strong!

Great suck up & breath

The multi-use magic head wear is 100% made of Polyester microfiber with soft and comfortable feature, very good in absorbing the sweat and wick moisture away quickly. Cool in summer, Warm in winter, it takes care of you very well in all seasons.

More than 12 ways of wearing

It is definitely valuable to buy a magic head wear with many styles of wearing, it can be used as headband, hear cover, beanie, pirate, neck warmer, face mask, balaclava, as many styles as you can image. One magic head wear replace all, got it all in one!

Warming tips

This head wear should be washed with water under 30 Celsius degrees and hang it dry in cooler place as much as possible.Do not tear the head wear heavily with your hand

100% promise 

Whenever you are not satisfied with our stuffs,you can replace new one or keep it yourself. We will do the full refund according to your choice ! we strive to make every buyer happy 

Package

1pcs /package

Product Features

  • 3D MAGIC EXPERIENCE:Are you tired of traditional head wear that is boring? Do you want to find some unique head wraps with 3D effects and crazy fun patterns? Of course you do! You want something pretty cool and eye-catching to wear as face mask, neck gaiter, headwear, scarf, or headband etc. We design unique patterns to meet your request! Each pattern is printed out by a 3D printer. You will find our stuffs obviously have 3D effects compared to the traditional old head wear.
  • UV, SUN, DUST PROTECTION:This head wear pass SGS UPF TEST.You will discover that the harmful ultraviolet rays will be blocked under the burning sun when going out for running, cycling, motorcycling, skiing, skateboarding or other activities.Wearing our heard wear, balaclava, face mask, or neck gaiter will block up to 95% of the harmful ultraviolet rays from your head, face, neck and ears to further protect your skin from being over exposed to the harmful rays of the sun.
  • COMFORTABLE&COOL DESIGN:This multi-use headwear is made of 100% Polyester microfiber, it has exceptional absorbing and wicking features. Traditional head wear could not absorb the sweat and wick the moisture fast, but our products can absorb and wick moisture away very quickly, as demonstrated in the comparing pictures. Cool in summer, warm in winter, comfortable in all seasons.
  • SIZE:The finishing standard size is Length*Width 18.9*9.4(inch) Thickness is 0.4 MM, high stretchable suit to head circumference 21.25 to 25 Inch. This fits teenagers as well as adults of all ages.
  • 100% MONEY BACK AND REPLACEMENT GUARANTEE:We strive to guarantee our customers are happy and satisfied with our products! This is our everlasting goal! Every customer will no doubt enjoy the privilege of a refund and/or replacement if our products do not meet their satisfaction. No risk to buy! Add to your cart now.

Click Here For More Information