Luxnwatts MK10 Assembled Extruder Hot End Kit for Creality CR-10 CR-10S S4 S5 3D Printer 1.75mm 0.4mm Nozzle Aluminum Heating Block

Welcome to order from Direct-Luxnwatts for Creality 3D Printer Parts

Creality MK10 Assembled Extruder Hot End Kit for CR-10 CR-10S S4 S5 3D Printer 1.75mm 0.4mm Nozzle Aluminum Heating Block

Feature:
1.100% brand new and high quality.
2.Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).
3.MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/24V 40W.

Packing List:
1x Aluminum block
1x Heating tube (heating tube 1 m long, 12V /24V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6*30mm Throat pipe (built-in Teflon)
1x Thermistor + Brass sleeve (1 meter long)

Description:
Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F
Thermistor and heater cable length: 1M

Product Features

  • This is Original Creality 3D Printer Part for CR-10 CR-10S S4 S5 3D Printer
  • Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon)
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/24V 40W

Visit The Website For More Information…

3 Pcs Shock Absorber Stepper Motor Vibration Damper Part Fit for Nema17 3D Printer

Item Descriptions:
-100% Brand New and High Quality
-Effective to reduce shock.
-Suitable for 3D printer.
-Anti vibration dampers for mostly applied stepper motors are available.
-These energy- absorbing rubber mounts with a metal mounting face.
-Stepper motors are affected by resonance.
-Resonance is caused by parts vibrating in concert with each other, which can be lessened by fitting a stepper motor anti vibration damper.

Package:
3 x Shock Absorber For Nema17

Item Specifications:
Size: 3.7cm x 3.7cm/1.5” x 1.5”
Color: As shown
Material: Rubber+Metal
Brand:Unbranded/Generic

Product Features

  • Effective to reduce shock.
  • Stepper motors are affected by resonance.
  • Anti vibration dampers for mostly applied stepper motors are available.
  • These energy- absorbing rubber mounts with a metal mounting face.
  • Resonance is caused by parts vibrating in concert with each other, which can be lessened by fitting a stepper motor anti vibration damper.

Visit The Website For More Information…

Creality Aluminum MK8 Extruder Drive Feed for CR-10 CR-10S 3D Printer Part by Luxnwatts

Thank you to order from Luxnwatts for Creality 3D Printer Parts

Package List
Mounting screws
Aluminum MK8 extruder frame, with bored intake hole
Bushing
Spring
Brass extruder drive gear
35 mm long Teflon intake guide. (keeps filament away from Z-screw rod) Special Bowden tube fitting (improved over stock) For all 1.75 mm filament

Product Features

  • Upgrading: Original Aluminum Drive Feed for CR-10, CR-10 S4, CR-10 S5, it is stable and durable
  • Replacement: MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5

Visit The Website For More Information…

5 Pcs 220×220mm 3D Printer Bed Build Surface Bed Plate Sticker, 3D Printer Plate Cover/Sticker/Tape Heated Bed Sheet

Description:
The Printed 3D parts will adhere to this surface and you can take it away after cool down.

Specifications:
Material: Composite material
Color: Black + White font
Size: 220 × 220mm/8.67 × 8.67 inch

Package Included:
5 × 3D Print Stickers

Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

How to use:
There are 2 methods to attaching the build surface on heatbed:
1. Clamp the build surface to the print bed using binder clips(at least 3 clips).
2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • This printing sticker can increase the adhesion between the consumable material and the heating plate during the printing
  • Effectively reduce the problems of ABS, PLA consumables, such as curling, deformation. Surface frosting treatment, and can be reused
  • Surface frosting treatment, and can be reused
  • Easy to use, aim to the heated bed plate and then paste it
  • Suitable for PLA, ABS, HIPS, PETG, TPE consumables, nylon, PC, and RETT materials

Visit The Website For More Information…